316L Stainless Steel Sheet Corrosion Resistance

The L in 316L stands for carbon content. 16L is a stainless steel material grade, AISI 316L is the corresponding American label, and sus 316L is the corresponding Japanese label. China's unified digital code is S31603, the standard brand is 022Cr17Ni12Mo2 (new standard), and the old brand is 00Cr17Ni14Mo2, which indicates that it mainly contains Cr, Ni and Mo, and the number indicates the approximate percentage.

L means ultra-low carbon, that is, the content of C is less than 0.03%. 316L composition range (%): C≤0.03，Si≤1.00，Mn≤2.00，P≤0.035，S≤0.03，Ni:12.0-15.0，Cr:16.0-18.0，Mo:2.0-3.0.

With rich experience, our stainless steel factory can provide you 316L corrosion resistant stainless steel sheet:

• Cutting+Slitting - 316L stainless steel narrow strip,special length/width plate

(1) Flame cutting: The cost of flame cutting equipment is low and it is the only economical and effective means to cut thick metal plates, but it has its shortcomings in thin plate cutting.

(2) Laser cutting：Laser cutting equipment can cut stainless steel plates below 30mm. Adding oxygen to the laser beam can cut 40mm thick carbon steel, but after oxygen cutting, a thin oxide film will be formed on the cutting surface.

Wire cutting: It is developed on the basis of EDM perforation and forming. It has not only

(3) developed the application of EDM, but also replaced EDM perforation and forming in some aspects.

(4) Shearing cutting：Uses a moving upper blade and a fixed lower blade and uses a reasonable blade gap to apply shearing force to metal plates of various thicknesses so that the plates can be broken and separated according to the required size. Shearing machine is a kind of forging machinery, and its main function is the metal processing industry.

(5) Plasma cutting：It is a processing method that uses the heat of a high-temperature plasma arc to partially or partially melt (and evaporate) the metal at the incision of the workpiece and uses the momentum of the high-speed plasma to remove the molten metal to form an incision.

(6) Slitting: Also known as slitting, refers to the process of uncoiling, slitting, leveling, and winding of stainless steel coils into coils of the required width.

• Surface processing - 8K mirror, HL hairline, color coating

• Bending+Welding - OEM customized products as drawing

• 310S Stainless Steel Sheet Cutting

• 310S  Stainless Steel Sheet Slitting

• 310S  Stainless Steel Sheet Color coating

• 310S  Stainless Steel Sheet Hairline/Brush

• 310S  Stainless Steel Sheet Etching

• 310S  Stainless Steel Sheet Welding

• 310S  Stainless Steel Sheet Bending

• 310S  Stainless Steel Sheet Embossing

• 310S  Stainless Steel Sheet Bead Blasted

• 310S  Stainless Steel Sheet Polishing